Filter
Top Products
1313
Basic Operation
e
• Unauthorized exchanging
and/or copying of copyrighted
recordings may be copyright
infringement.
Connections you’ll need to make.
Playback (Source)
1
Recording (Editing) unit
Insert
pre-recorded
tape.
Insert blank tape
with record tab.
• Dubbing tapes protected with
Copy Guard will have poor
quality results.
2
3
4
5
Press PLAY then
PAUSE at starting
point to put in
Standby mode.
Press PLAY
to start dubbing.
Press STOP
to stop dubbing.
Select “LINE” mode.
See “Selecting Input Mode” below.
Press REC, then
PAUSE/SLOW
immediately to put in
Standby mode.
Press PAUSE/SLOW
to start dubbing.
Press STOP
to stop dubbing.
Selecting Input Mode
Method 1:
Press CH . The display will change as follows.
Method 2:
a Press ACTION for MAIN MENU.
b Press to select “TV”, then press
ACTION for SET UP TV screen.
c Press to select “INPUT SELECT,” and then
press to select “TUNER” or “LINE”.
d Press ACTION twice to exit this mode.
Caution
(Perform operation of steps 4 and 5 on both units at same time.)
STOP
1
2
3
125LINE
(CABLE)
69
(TV)
or
*Important: If a remote control button does not work when pressed, press the COMBO button on
the remote and try the button again.
Recording (Editing) unit
OUT
IN
AUDIO
AUDIO IN
VIDEO IN
IN FROM ANT.
OUT TO TV
VID EO
Playing (Source) VCR
Copy Your Tapes (Dubbing)