Filter
Top Products
2525
Advanced Operation
Auto Operation Functions
Tape Position Display
Press TAPE POSITION to detect current tape
position.
1
DETECT
I
NG
TAPE
POS
I
T
I
ON
2
■
Auto Shut Off
No broadcast signal in TV (Only when
Weak Signal Display is set to OFF),
blank tape is Played for 5 minutes
➞
Power turns off
• This feature is canceled if any button is
pressed during above mode.
■
Auto Playback
Insert a tape in Power off mode
➞
Power turns on
• Playback begins if tape has no record tab.
■
Auto Rewind
Tape reaches its end
➞
Rewind
➞
Stop
■
Playback Auto Eject
(Repeat Play is “OFF”)
Tape with no record tab reaches its end
Rewind
➞
Stop
➞
Eject
• “DETECTING TAPE
POSITION” only appears the
fi rst time a cassette is inserted
and it takes several seconds
for correct indication to appear.
• The present tape position
indication is displayed.
Press TAPE POSITION (or wait 5 seconds)
to return to the normal screen.
To fi nd out present tape position.
Tape position is displayed for VHS-C Cassettes
type, tapes under 30 minutes, and some other
tapes, but the position is not correct.
TAPE
POSITION
BEG
I
N
END
*Important: If a remote control button does not work when pressed, press the COMBO button on
the remote and try the button again.