Filter
Top Products
18
NOTES: • The TV/VCR will automatically turn off approxi-
mately 1 hour later after the ON TIMER turns on
if no OFF TIMER has been set. To continue
watching the TV, press any button to cancel the
one hour automatic shut off.
• To cancel ON TIMER, follow above steps 1-5,
then press the SET/TRACKING + or – button to
select the CANCEL. Press the MENU button
repeatedly to return to the normal screen.
• After setting the ON TIMER, "
" of the OFF TIMER
will flash on and off. If you wish to set the OFF
TIMER, press the ENTER button then follow the
steps 4-6 on " TO SET THE OFF TIMER" .
• If you want to correct the digits while setting,
press the CANCEL button until the item you
want to correct, then press the SET/TRACKING
+ or – button to correct the desired setting.
ON/OFF TIMER
+/–/ENTER/CANCEL/MENU
ON TIMER
7:00AM CH001
SUN-SAT CANCEL
OFF TIMER
12:00AM CANCEL
ON/OFF TIMER
〈
+/–/ENTER/CANCEL/MENU
〉
ON TIMER
7:00AM CH012
MON-FRI CANCEL
OFF TIMER
12:00AM CANCEL
ON/OFF TIMER
〈
+/–/ENTER/CANCEL/MENU
〉
ON TIMER
7:00AM CH012
MON-FRI SET
OFF TIMER
12:00AM CANCEL
This feature allows you to have the TV/VCR automati-
cally turn on at a predetermined time. If you program
the ON TIMER once, the TV/VCR will turn on on the
programmed day (daily/weekly) at the same time to
the same channel.
EXAMPLE: Turning on the TV to channel 12 at 7:00 AM,
MONDAY-FRIDAY.
1 Press the MENU button.
Press the SET/TRACKING + or
– button to select the TV SETUP
option, then press the ENTER
button.
ON/OFF TIMER
+/–/ENTER/CANCEL/MENU
ON TIMER
12:00AM CH001
SUN-SAT CANCEL
OFF TIMER
12:00AM CANCEL
TV SETUP
V-CHIP SET
ON/OFF TIMER
PICTURE
+/–/ENTER/MENU
M E N U
TIMER REC SET
TV SETUP
CH SETUP
AUTO REPEAT ON OFF
SYSTEM SETUP
+/–/ENTER/MENU
5 Press the SET/TRACKING + or
– button to select V-CHIP.
6 Press the ENTER button to
display ON.
7 Press the MENU button until the
MENU screen is cleared.
V-CHIP SET
V-CHIP : OFF
TV RATING : TV—PG
MOVIE RATING : PG—13
CHANGE PASSWORD
〈
+/—/ENTER/MENU
〉
V-CHIP SET
V-CHIP : ON
TV RATING : TV–PG
MOVIE RATING : PG–13
CHANGE PASSWORD
〈
+/–/ENTER/MENU
〉
V-CHIP SET
PASSWORD: – – – –
〈
0–9/ENTER/CANCEL/MENU
〉
V-CHIP SET
V-CHIP : ON
TV RATING : TV–PG
MOVIE RATING : PG–13
CHANGE PASSWORD
+
/–/ENTER/MENU
V-CHIP SET
V-CHIP : ON
TV RATING : TV–PG
MOVIE RATING : PG–13
CHANGE PASSWORD
NEW
PASSWORD: – – – –
〈
0–9/ENTER/CANCEL/MENU
〉
V-CHIP SET
V-CHIP : ON
TV RATING : TV–PG
MOVIE RATING : PG–13
CHANGE PASSWORD
CONFIRM
PASSWORD: – – – –
〈
0–9/ENTER/CANCEL/MENU
〉
To use the TV after the TV is protected.
When the program applied to the V-Chip setting is
received, enter the password, then press the ENTER
button. When the password is entered correctly the
protection will be temporarily overridden.
If you forget the password...
Disconnect the AC cord plug from AC outlet and leave
the unit for more than two minutes. Insert the AC cord
plug again, then turn the volume level into a minimum.
Press the VOL – button on the unit and the 0 button on
the remote control for more than 1 second simultaneously.
TO CHANGE PASSWORD
4 Enter the same password
again to confirm, then press the
ENTER button.
5 Press the MENU button
repeatedly to return to normal
screen.
3 Enter the new password using
the Direct Channel Selection
button (0-9), then press the
ENTER button.
2 Press the SET/TRACKING +
or – button to select CHANGE
PASSWORD, then press the
ENTER button.
1 Repeat the steps 1-3 on “TO
REGISTER THE PASS-
WORD”, then enter the
Password using the Direct
Channel Selection button (0-
9), then press the ENTER
button.
TO SET THE ON TIMER
6 Press the SET/TRACKING + or –
button to select the SET mode,
then press the ENTER button.
Press the MENU button repeat-
edly to return to normal screen.
5 Set the desired minute, channel
and daily or weekly timer date
as in step 4.
4 Press the SET/TRACKING + or
– button to set the desired hour,
then press the ENTER button.
3 Press the SET/TRACKING + or
– button to select the ON TIMER
option, then press the ENTER
button.
2 Press the SET/TRACKING + or
– button to select the ON/OFF
TIMER option, then press the
ENTER button.
NOTE : The V-Chip function is activated only on pro-
grams and tapes that have the rating signal.
SETTING THE V-CHIP
5B02301A E P12-19 4/2/03, 3:37 PM18