Filter
Top Products
22
EZ Sync™ Connections
Follow the connection diagrams below for HDAVI control
of a single AV piece of equipment such as a Panasonic
DIGA-DVD recorder, RAM theater, or Player theater system.
Refer to pages 52-54 for Setup Menu settings and additional
control information.
Optional HDMI and/or optical cables are not provided.
•
If the connection (or settings) of equipment compatible with
HDAVI control has been changed, switch the power of this
unit Off then On again while the power of all equipment is
On (so that the unit can correctly recognize the connected
equipment) and check that DIGA, RAM theater, and Player
theater playback operate.
Note
HDMI 1 is recommended. When connecting to HDMI 2 or HDMI 3, set the input mode to HDMI 2 or HDMI 3 (p. 29) initially before
connecting to HDMI 2 or HDMI 3. After connection, confirm the HDMI control functions (p. 52-54).
•
One AV amp and one DIGA recorder can be operated with this unit.
Be sure to connect the AV amp between this unit and the DIGA recorder.
Setting this unit after connections
After making connections as shown above, set “EZ Sync” (under “EZ Sync setting”) first to “Off” and then “On” using
the Setup Menu. (p. 52-53)
•
•
■
DIGA
(Panasonic DVD
Recorder)
Connecting this unit to the DIGA, RAM
theater, Player theater, or HD Camcorder
For DIGA : Connect with HDMI cable
For RAM theater and Player theater :
Connect with the HDMI and audio cables. If audio cable
is not connected, you cannot listen to the TV program
through the theater system.
For HD Camcorder : Connect with HDMI cable
(HDMI 3 is recommended when connecting to a
Camcorder via HDMI.)
■
•
•
•
Connecting this unit to a DVD recorder and
AV amp
When using an “EZ Sync” audio-video amplifier
and a compatible DIGA recorder, use a daisy chain
connection as shown below.
■
Notes
Individual HDMI equipment may require additional menu settings specific to each model. Please refer to their respective operating
instruction manuals.
When audio from other equipment connected to this unit via HDMI is output using “DIGITAL AUDIO OUT” of this unit, the system
switches to 2CH audio. (p. 52-53)
(When connecting to an AV amp via HDMI, you can enjoy higher sound quality.)
•
•
or
Panasonic AV amp
Panasonic RAM theater/
Panasonic Player theater
DIGA
(Panasonic DVD
Recorder)
Panasonic HD
Camcorder
HDMI
(AV OUT)
HDMI
(AV OUT)
AUDIO
IN
HDMI
(AV IN)
HDMI
(AV OUT)
Recommended AV Connections (continued)
HDMI
(AV OUT)
or
or