Filter
Top Products
27
Basic Operation
6. Press ▲▼ to select “ANT in”.
7. Press ◄► to select “Antenna” or “Cable”.
8. Press ▲▼ to select “Auto”.
9. Press OK to display the Auto program menu.
10
. Press ▲▼ to select “All channels”, “Analog
only”, or “Digital only”.
11
. Press OK to start scan.
12
. After Auto program is complete, the unit will
return to Manual program mode. To place
the channels that were located by auto scan
in memory, move the cursor to “Apply” and
press OK. (p. 27-28)
If OK is not pressed after selecting APPLY,
the channels will not be memorized.
Notes
Some channels with very weak signals may be locked into
memory. If desired, these channels can be deleted man u al ly
using the “Manual program setting”. (p. 27-28)
“Auto program” must be done when you select the input
signal for the first time or whenever you change the antenna
configuration.
•
•
ANT in
Auto
Manual
Signal meter
Cable
Program channel
ANT in
Auto
Manual
Signal meter
Cable
Program channel
ANT in
Auto
Manual
Signal meter
Cable
Program channel
ANT in
Auto
Manual
Signal meter
Cable
Program channel
All channels
Analog only
Digital only
Auto program
Auto program
Scanning digital channel
Progress
Quit 40%
All channels
Analog only
Digital only
Auto program
Auto program
Scanning digital channel
Progress
Quit 40%
Manual program setting
Use this procedure when changing setting of
receiving channels or changing the channel dis play.
Also, use to add or delete channels from channel list
manually.
Procedure
1. Press MENU to display the Main Menu
screen.
2. Press ▲▼ to select “Setup” icon.
3. Press OK to display the Setup menu.
4. Press ▲▼ to select “Program channel”.
5. Press OK to display the Program channel
menu.
If Lock (p. 41) has been set, you must enter your
password to display the Program channel menu.
6. Press ▲▼ to select “Manual”.
7. Press OK to enter the Manual program
screen.
•
EZ Sync
Picture
Audio
Timer
Lock
Memory card
Setup
Menu
EZ Sync
Picture
Audio
Timer
Lock
Memory card
Setup
Menu
Surf mode
All
Language
Program channel
External devices
CC
EZ Sync setting
Setup
1/2
Surf mode
All
Language
Program channel
External devices
CC
EZ Sync setting
Setup
1/2
ANT in
Auto
Manual
Signal meter
Cable
Program channel
ANT in
Auto
Manual
Signal meter
Cable
Program channel