Filter
Top Products
10
Horizontal phase adjustment control [H.PHASE]
This is used to adjust the horizontal phases of the
gen-lock input and video output when two or more
cameras are used at the same time.
Subcarrier phase coarse adjustment switch
[SC COARSE]
This is used to adjust the hue of the gen-lock input and
video output coarsely when two or more cameras are
used at the same time. When used in combination with
the subcarrier phase fine adjustment control
, the
adjustable range is greater than 360 degrees.
Subcarrier phase fine adjustment control
[SC FINE]
This is used to adjust the hue of the gen-lock input
and video output finely when two or more cameras are
used at the same time. When used in combination with
the subcarrier phase coarse adjustment switch
, the
adjustable range is greater than 360 degrees.
Cable compensation selector switch [COARSE]
This is set in line with the length of the cable between the
camera and RCU.
Switch position Cable length
1 Less than 246 ft. (75 m)
2 246 to 492 ft. (75 to 150 m)
3 492 to 754.4 ft. (150 to 230 m)
4 754.4 to 984 ft. (230 to 300 m)
(The cable lengths above are approximations only.)
Y gain adjustment control [ADJUST Y]
This is used to adjust the Y (luminance) level of the video
output signals to match the cable length.
(Select the cable length using the cable compensation
selector switch
before adjusting the level. The chroma
amount is also varied by this control.)
Chroma gain adjustment control
[ADJUST CHROMA]
This is used to adjust the chrominance level of the video
output signals to match the cable length.
(Select the cable length using the cable compensation
selector switch
and adjust the Y level of the video
output signals using the Y gain adjustment control
before adjusting the level.)
Menu ON/OFF switch [MENU OFF/ON]
OFF: Only the camera’s images are output to the video
output.
ON: The camera’s images and superimposed camera’s
menu are output to the video output.
Menu items can be selected and data changed using
the item UP switch
, item DOWN switch , DATA
YES/UP switch
and DATA NO/DOWN switch .
For details on the menu items and contents, refer to
the camera’s operating instructions.
Item UP switch [ITEM UP]
When this is pressed while a menu is displayed, the item
which is the next one up from the current item on the
menu can be selected.
Item DOWN switch [ITEM DOWN]
When this is pressed while a menu is displayed, the item
which is the next one down from the current item on the
menu can be selected.
DATA YES/UP switch [DATA YES/UP]
When this is pressed while the main menu is displayed,
the submenus of the items are displayed.
When it is pressed while a submenu is displayed, the
setting is incremented.
DATA NO/DOWN switch [DATA NO/DOWN]
When this is pressed while the main menu is displayed,
the item which is the next one down from the current item
on the menu can be selected.
When it is pressed while a submenu is displayed, the
setting is decremented.
Parts and their functions