Filter
Top Products
20
When the unit is to be mounted on a EIA 19-inch rack, use rack mount angles (provided) and four mounting screws (M410)
(provided).
1. Turn off the power switch of the unit.
2. Remove four screws fixing the rubber feet and remove the four rubber feet from the bottom of the unit.
3. Fix the rack angle handle by using four rack angle handle fixing screws.
4. Attach the rack mount angles on both sides and fix them by using four mounting screws provided with the rack
mount angle.
5. Install the unit on the EIA 19-inch rack by using four screws (locally purchased).
Rack mounting
Remove rubber feet.
Fix four screws (not provided).
Do not use the unit on the place affected by the vibration.
When the fan is used to keep the temperature in the rack within 122°F (+50°C), it should be put apart from the monitor.
Cautions:
Rack angle handle
Rack mount angle fixing screws
(provided)
Rack mount angle
Rack mount angle
fixing screws
(provided)
Mounting screws
(provided)
Mounting screws
(provided)