Filter
Top Products
Operation Guide
TC-14A12P / TC-20B12
- 14 -
ENGLISHENGLISH
ENGLISHENGLISH
ENGLISH
Hotel ModeHotel Mode
Hotel ModeHotel Mode
Hotel Mode
This feature is very useful in hotels or when the owner does not want other people to change setting levels.
When activated, only CHANNEL, VOLUME, PICTURE MENU, RECALL, MUTE, TV/AV buttons will operate.
Supplementary Remote Control OperationsSupplementary Remote Control Operations
Supplementary Remote Control OperationsSupplementary Remote Control Operations
Supplementary Remote Control Operations
ON MUTE (Mute/Closed Caption)ON MUTE (Mute/Closed Caption)
ON MUTE (Mute/Closed Caption)ON MUTE (Mute/Closed Caption)
ON MUTE (Mute/Closed Caption)
This feature will function only when:
1. Mode/CC feature is OFF.
2. The MUTE button (
) is pressed on the remote control.
Press the navigation button ( / ) to select an option as shown below:
LanguageLanguage
LanguageLanguage
Language
To select functions vertically or
horizontally, press the navigation
buttons.
Ö
NO NO
NO NO
NO
C1C1
C1C1
C1
C2C2
C2C2
C2
C4C4
C4C4
C4
C3C3
C3C3
C3
Ö Ö
Õ
Õ
Ö
To activate
::
::
:
1. Adjust sound level.
2. Press the TIMER button on the remote control and
set it to 30 minutes.
3. Press and hold the RECALL button.
4. Press the CHANNEL ( ) button on the TV
panel.
To exit Hotel mode:
Press the VOLUME ( ) button on the TV panel and the
TIMER button on the remote control simultaneously.
cccc
cccc
cc
IDIOMA
PORTUGUÊS
ESPAÑOL
ENGLISH
IDIOMA
PORTUGUÊS
ESPAÑOL
ENGLISH
LANGUAGE
PORTUGUÊS
ESPAÑOL
ENGLISH
Troubleshooting ChartTroubleshooting Chart
Troubleshooting ChartTroubleshooting Chart
Troubleshooting Chart
Before you call for service, determine the symptoms and make a few simple checks, as shown below.
Snowy picture Noisy sound
Multiple image Normal sound
Interference Noisy sound
Normal picture No sound
No picture No sound
No color Normal sound
No video Low sound
Colored blotches Normal sound
No color Noisy sound
Antenna location and/or connection
SIGNALSSIGNALS
SIGNALSSIGNALS
SIGNALS
PicturePicture
PicturePicture
Picture
SoundSound
SoundSound
Sound
CheckCheck
CheckCheck
Check
Antenna location and/or connection
Electrical appliances,
lights, cars
and motorcycles
Volume
(check if mute control is
activated on the remote control)
Check that the AC power cord is plugged into
the AC outlet.
Unit has not been turned ON.
Brightness/contrast and audio control settings
(Check by pressing the power switch.)
Color control settings
Perform channel tuning procedure again.
Unit was relocated while it was ON.
Improper color system