Panasonic TH-42PWD6 Flat Panel Television User Manual


 
21
Digital Zoom
1
3
2
4
This displays an enlargement of the designated part of
the displayed image.
Display the "Operation Guide".
Press to access Digital Zoom.
Select the area of the image to be enlarged.
The Operation Guide will be displayed.
Press on the enlargement location to select.
MOVE
Select the magnification required for the enlarged display.
Each time this is pressed, the magnification factor changes.
This is shown in the image being displayed.
Return to normal display (quit Digital Zoom).
Press to exit from the Digital Zoom.
The cursor will move.
SURROUND
button
MUTE button
VOL button
During Digital Zoom, only the following keys
can be operated.
OFF TIMER button
Exit
2
×1 ×2 ×3
R - STANDBY
G POWER ON
INPUT MENU ENTER
+
VOL
TH-42PWD6
1
Exit
R
N R
MULTI
PIP
SWAP SELECT MOVE
INPUT
VOL
PICTURE
SOUND
SET UP
ASPECT
PICTURE
POS. /SIZE
OFF TIMER
PC
SURROUND
ZOOM
Notes:
(1) When power goes OFF (including Off Timer operation), Digital Zoom terminates.
(2) The Digital Zoom function cannot be selected while in the following operation states:
Multi-screen (MULTI DISPLAY). (see page 28)
Multi-viewer (Picture in Picture, Picture out Picture, Picture and Picture) operation. (see page 10)
(3) While Digital Zoom is in operation, "Adjusting Picture Pos./Size" cannot be used.
(4) For RGB/PC input signals, normal multi-display magnification is only available at the VGA, SVGA and XGA resolution.
(5) The Digital Zoom capability is functional for the following component signals:
525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 1125 (1080) / 60i · 50i · 24sF, 750 (720) / 60p · 50p, 1250 (1080) / 50i
(6) The Digital Zoom capability is functional for the following composite signals:
NTSC, PAL, SECAM