Filter
Top Products
12
Power On/Off and input signal selection
Power On/Off
Remote Control Sensor
Power Indicator
AC cord connection
Connecting the plug to the Wall Outlet
Note:
Main plug types vary between countries. The power plug shown
at left may, therefore, not be the type fitted to your set.
Press the Power switch on the Plasma Display to turn the set
on: Power-On.
Power Indicator: Green
Example: The screen below is displayed for a while after the
Plasma Display is turned on. (setting condition is an
example.)
When the Power is turned on for the first
time, the Language selection screen is
displayed.
From the second time on, language
selection can be done from the setup
menu. (see page 13)
Select the desired language using the
and
keys and press the ACTION
button.
From the second time on, the below screen
is
displayed for a while (setting condition is
an example).
Press the
button on the remote control to turn the
Plasma Display off.
Power Indicator: Red (standby)
Press the
button on the remote control to turn the
Plasma Display on.
Power Indicator: Green
Turn the power to the Plasma Display set off by pressing
the
switch on the Plasma Display, when the Plasma
Display is on or in standby mode.
Connecting the AC cord plug to the Plasma Display.
Note: During operation of the power management function, the power
indicator turns orange in the power off state.
Fix the AC cord plug
securely to the Plasma
Display with the clamper.
(see page 7)
R - STANDBY
G POWER ON
R - STANDBY
G POWER ON
TH-42PWD6
INPUTMENU ENTER
–+
VOL
Select
OSD Language
Set
En
g
lish
(
UK
)
Deutsch
Fran ais
Italiano
Es
p
a ol
ENGLISH
(
US
)
INPUT
SURROUND
VOL
NR
PC
4:3