Filter
Top Products
15
1
Click on
[Start]
[Settings]
[Control Panel]
Double-click on “the system” icon of the control panel,
and open the properties of the system.
2
The properties of the system opens. Next, click on the
“Device Manager” tab.
3
Double-click “Ports [COM&LPT]”.
Confirm that “USB-Serial for Touch Panel (COMx)” is
found in “Ports [COM&LPT]”.
(COMx) is the COM port number for using a touch panel.
As for the COM port number, the setup number varies in
the use environment of the PC.
4
Next, double-click “Universal Serial Bus controllers”.
5
Confirm that “MATSUSHITA USB-Serial Bridge for Touch
Panel” is found in “Universal Serial Bus controllers”.
6
Click on this button.
The setup of the USB driver is finished.
COM port number is confirmed with “Device Manager”
Installation of the USB Driver