Filter
Top Products
19
1
Click on [Start]
[Settings]
[Control Panel]
Double-click on “the system” icon of the control panel,
and open the properties of the system.
2
The properties of the system opens. Next click on the
“Hardware” tab. Then click on the “Device Manager”
button.
3
Double-click “Ports [COM&LPT]”. Confirm that
“MATSUSHITA USB-Serial Bridge for Touch Panel
(COMx)” is found in “Ports [COM&LPT]”.
(COMx) is the COM port number for using a touch panel.
As for the COM port number, the setup number varies in
the use environment of the PC.
The setup of the USB driver is finished.
Installation of the USB Driver
COM port number is confirmed with “Device Manager”