Filter
Top Products
8
Never attach a plasma display onto the touch panel by placing the touch panel
on a flat surface. Doing so may damage the infrared sensor on the touch
panel.
If you cause a malfunction by attempting attachment in this way, you will be
charged for repairs.
Attachment precautions
Attach the mounting bracket and
conductivity tape
(1)Orientate the mounting bracket [A] so that the side
lined with cushion faces the touch panel.
(2)During attachment of the touch panel to the display,
lift the bracket to its highest point so that it does not
strike the display and tentatively fasten at the upper
part of 2 points to the left and right.
(3)For the TY-TP42P6-S, attach conductivity tapes at 2
areas on the back of plasma display.
Be careful not to strike the touch panel on the display.
1
Attach the touch panel to the display front surface.
Attachment of the touch panel to the plasma display
2
Conductivity Tape
Stand
Plasma Display
Touch Panel
Mounting
bracket [A]
Touch panel
(Rear Side)
Mounting
Screw [A]