Panasonic TY-TP42P6-S Flat Panel Television User Manual


 
30
Specifications
Model Number
Type
Power Source
Voltage
Electric current
Supply system
Touch Panel
Detection system
Panel window (W × H)
Detection range (W × H)
Effective detection range
Operating modes
Resolution (W × H)
Detection pitch
Output system
Number of optic elements (W × H)
Optic element pitch (W × H)
Minimum stylus size (W × H)
Scan speed
Touch pen
USB Interface (USB 1.1)
Temperature
Humidity
Resistance to extraneous light
Panel form
External dimensions (W × H × T)
Weight
Extruded material
TY-TP42P6-S TY-TP50P6-S
Optic Touch Panel
DC + 5 V ± 10 %
DC + 5 V Max 400 mA under
from USB Bus Power (DC + 5 V Max 500 mA)
Infrared obstruction detection system
928.5 mm × 526.5 mm (36.55 × 20.73 ″) 1,118 mm × 632 mm (44.02 × 24.88 ″)
916 mm × 516 mm (36.06 × 20.31 ″) 1,100 mm × 620 mm (43.31 × 24.41 ″)
Detection range + 1.0 mm (0.04 ″) at the top, bottom, left and right
Detection operation at input point, during initial movement and at end point 1
1,833 × 1,033
1 2,201 × 1,241 1
2.0 mm × 2.0 mm (0.08 × 0.08 ″)
Coordinate output
230 × 130 elements 276 × 156 elements
4.0 mm × 4.0 mm (0.16 × 0.16 ″)
6.0 mm × 6.0 mm (0.24 × 0.24 ″)
Initial touch: 30 ms/frame max.; during movement: 8 ms/frame max.
Infrared system
When operating: 0°C (32°F) to 50°C (122°F) (temperature gradient 25°C (77°F)/hr max.)
2
When not operating: -10°C (14°F) to 60°C (140°F) temperature gradient 25°C (77°F)/hr max.
When operating: 20% to 85% (must be no condensation) 2
When not operating: 10% to 95%
Lateral light: 2,000 lx MIN +20% (angle of incidence: 20°)
Frontal light: 10,000 lx MIN
+20%
(angle of incidence: 90°)
Flat panel (Flat type)
1,066 mm × 634 mm × 69 mm 1,256 mm × 748 mm × 69 mm
(41.97 × 24.96 × 2.72 ″) (49.45 × 29.45 × 2.72 ″)
(Excluding mounting brackets) (Excluding mounting brackets)
3.5 kg (7.7 lbs) Excluding mounting brackets 4.2 kg (9.3 lbs) Excluding mounting brackets
Aluminum
Notes:
1 When it is used with exclusive driver software.
2 This applies to the touch panel alone. When the panel is attached to a device such as a PDP, follow the
environmental conditions for the device being used.
Terminal No. and Signal name
12
43
1 Vcc
-
DATA 2
+DATA
3
4 GND
(TYPE B)
USB cable length: 2 m (6.56 ft)