Filter
Top Products
11
Remote Control Television Operation
BUTTON WHAT IT DOES
STANDBY
The remote control button is used to turn the television into Standby mode. When
the television is in Stand-By it is possible to turn it back on by pressing this remote
control Power Button, the Programme Number UP or DOWN Button (front panel or
remote control) or any of the direct Programme Number Buttons.
PICTURE
This button is used to select the picture menu. Please refer to page 14 for detailed
operating instructions.
SOUND
This button is used to select the sound menu. Please refer to page 15 for detailed
operating instructions.
SET UP
This button is used to select the set up menu. Please refer to page 16 for detailed
operating instructions.
RECALL
Pressing this button will display all current active functions. Pressing the button
again cancels the recall function and removes the text being displayed on the
screen. If the button is not pressed within about 2 seconds it automatically
switches to display the Programme Number or the AV Number and the Off-Timer
setting. Pressing the button again cancels the recall function and removes the text
being displayed on the screen.
The recall button also allows you to change channel. The coloured buttons are used
to select the channel range.
Use the UP and DOWN buttons to highlight the channel you want and press the
Blue button. The TV will switch to the selected channel. Use the Red and Green
buttons to select a different range of channels.
DIRECT TV RECORD
Allows immediate recording of the programme currently on the screen. (This
function only works with a “Q-Link” compatible video recorder. See page 17.
AMBIENCE
This button switches the ambience (surround sound) on and off.
ASPECT
This button is used to move through the different aspect options of AUTO, 16:9,
14:9, 4:3, Zoom 1, Zoom 2, Zoom 3. Please refer to page 19.
C (DIRECT CHANNEL SELECTION)
To directly access broadcast channel numbers, press the C Button followed by the
two digits required (e.g. C02, C28 etc).
Please refer to drawing on Page 9 for location of Remote Control Buttons.
25 - > 49
VCR - > 24
50 - > 74 75 - > 99
Page +Page -
OK