Filter
Top Products
28
Tuning menu - Shipping condition
Shipping condition allows you to reset the TV to its original condition, i.e. no channels tuned in.
This is useful, for example, if you move to a different area when you will probably want the TV to tune itself to
your new local stations.
The Shipping condition menu will reset all data, clearing all tuning information and resetting all control levels
back to factory settings.
Open the Setup menu
Move to Tuning menu
Access Tuning menu
Move to Shipping condition
Access Shipping condition
NOTE: If you procede with the next step all tuning data will be erased (all stations and their positions stored in
your TV’s memory will be wiped out so that the new settings can be stored. All picture and sound levels will be
returned to factory settings. If you exit the procedure after this point and before Shipping condition is complete, no
station information will be stored. You will have to restart and complete the Auto setup so that the TV can be retuned.
You can exit the Shipping condition setting at any time by pressing TV/AV to exit or SETUP to return to the
tuning menu.
Press STR to start
You will be given a warning message followed by two chances to change your mind.
Each time that you are asked, “Are you sure?”,
press STR to confirm,
(or exit the Shipping condition)
There is a short delay before the operation starts.
“OK” will be displayed on the screen.
You will be taken to the Auto setup option. (See page 26). You can either start the Auto setup or change the
country code.
Country select
If you turn the television off and then back on instead of starting the Auto setup, you will be given the
opportunity to change the country code.
Select the country. You can choose
between Australia and New Zealand.
Apply the country select
You will be taken to the Auto setup option. (See page 26).
Shipping condition
Access
Shipping condition
All tunin
g
data will be erased
Are you sure ?
Select
Country
New Zealand
Australia
Select
Country
Select
OK