Filter
Top Products
14
Normalisation N
Pressing the Normal ( ) Button on the remote control, will return all picture settings to the factory preset
levels. This is called “Normalisation”.
Normalisation will only occur if the Picture Menu is not displayed when the Normal ( ) Button is pressed.
Picture Menu
Notes:
1. You can change the level for each function (Contrast, Brightness, Colour, Sharpness and Tint) for each picture
menu option.
2. Picture menu levels can be set for TV, AV1, AV2, AV3 and AV4 modes.
3. TINT only appears when the TV is receiving NTSC signals and the television is in the AV mode.
4. In TELETEXT mode, only the CONTRAST will be displayed.
Push the PICTURE button.
Select the option.
Adjust the chosen option.
Push the TV/AV at any time to return to
watching TV.
Pushing the STR button after making an
adjustment will store the new setting as the
default value, replacing the factory setting.
Viewing mode
Contrast
Brightness
Colour
Sharpness
Tint (AV only)
Colour Balance
P-NR
The Viewing mode control allows you to change the Picture setting between Dy-
namic, Normal and Cinema.
Dynamic For viewing in brightly lit rooms. This menu selects higher than normal
levels of Brightness and Contrast.
Normal For viewing in normal (evening lighting) environments. This menu selects
the normal levels of Brightness and Contrast.
Cinema For viewing in a dark room. This menu selects reduced levels of
Brightness and Contrast.
Increase or decrease the level of these options to suit your personal preference.
The Colour balance control allows you to change the White balance setting between
Standard, Warm and Cool.
The P-NR (Picture Noise Reduction) system is designed to reduce picture noise
during poor quality reception conditions. Pushing the left or right buttons will change
the setting between Off, Strong, Weak and Auto.
Contrast
Picture menu
Contrast
Brightness
Colour
Sharpness
Colour balance Normal
AutoP-NR