Filter
Top Products
27
Tuning the Television to a VCR
Turn the VCR On and either start a known tape playing or set the VCR Test Signal, if fitted, to On (refer to the
VCR operating instructions).
Follow the Manual tuning procedure above. The television will treat the VCR as if it was a normal television
broadcast station.
NOTES:
The antenna lead must be connected to the VCR and the VCR RF-Out must be connected to the TV RF-In.
Please refer to page 33.
The picture and sound quality are usually much better if the VCR is connected using the AV Terminals. Please
refer to page 33 or 34.
Tuning Menu - Manual tuning
This Television has been factory tuned to all the Australian major city channels. Use this tuning procedure only if
you wish to reset individual Programme Numbers. The television should be switched ON and the TV/AV Switch set to
TV.
Press the “F” button and move to the Tuning Menu.
Press the “- / \/” or “+ / /\” button to access Manual
tuning.
Press the TV/AV button to switch to Change
programme.
Press the “- / \/” or “+ / /\” button to select the
programme location number to tune.
Press the “TV/AV” button to switch to Search.
Press the “- / \/” or “+ / /\” button to start the search.
The television will automatically search for the next
broadcast signal. As each station is found the search
will stop. If you do not want this station restart the
search.
Press the “STR” button to store the selected station.
The programme location number will flash.
Push the “F” button to return the television to normal
operation.
Using the Remote Control Using the Front Panel
Push the Set Up button.
Move to the Tuning Menu.
Access the Tuning Menu.
Move to Manual tuning.
Access Manual tuning.
Select the programme location
number to tune.
Start the search. The television will
automatically search for the next
broadcast signal. As each station is
found the search will stop. If you do not
want this station restart the search.
Store the selected station. The
programme location number will flash.
Push TV/AV button to return the
television to normal operation.
28
CH 28
Exit
TV/AV
‘STR’ Button Store
Return
Search
down/up
Programme
down/up
Ma nual t uning
02 78.01 41
28
CH 28
- , + : Search
Manual tuning (Front panel)
STR F - / V + / ^ TV/AV
TV/AV : Move cursor
STR : To store
F : To exit
02 78.01 41