Filter
Top Products
6-4
Flat washer
(not supplied)
Spring washer
(not supplied)
M12 bolt
(not supplied)
Earthed mains extension lead
(example)
Signal cable
(example)
• Reinforce the ceiling if it is not strong enough.
• Use bolts appropriate for the ceiling material (not supplied).
• Refer to the installing examples for wooden structure and concrete structure.
M12 bolt
Spring washer
Flat washer
curled plug(M12)
Anchor nut or
Concrete
Installing to a concrete structure(example)Installing to a wooden structure(example)
M12 bolt
Spring washer
Flat washer
Flat washer
Nut
Beam
"
]
)(min.thickness 40mm [1
9
/
16
Mounting plate
Ceiling board
Nail
Installation the ceiling unit.
Attach the ceiling unit (upper section)
1) Before installing the upper section, pull the wiring through the pipe.
Use an earthed mains extension lead (not supplied).
2) Make holes in the ceiling using a method appropriate for the ceiling
structure and for inserting M12mm bolts. Install the upper section
using a hex socket bolt (M12 not supplied), flat washer and spring
washer.
1