Panasonic VDR-D160GN DVR User Manual


 
Disc and card management
Finalizing a disc
82
LSQT1184
Finalizing a disc
(-RW‹VR›) (-RW‹V›) (-R)
If you insert a DVD-RW or a DVD-R recorded on this unit that has not been finalized in
another device such as a DVD recorder or a computer, the disc may become unusable.
Be sure to finalize the disc on this unit before inserting it in other devices.
¬Rotate the mode dial to select .
1 Connect this unit to the AC adaptor.
Finalization cannot be executed when using a battery. If the power supply stops while finalizing,
the finalization will fail and the data may be damaged. Use the AC adaptor.
2 Press the MENU button, then select [ SETUP] #
[ FINALIZE] # [YES] and press the joystick.
3 When the confirmation message appears, select [YES], then press the
joystick.
When finalizing is complete, press the MENU button to exit the message screen.
Do not finalize a disc recorded on this unit using any
other device.
In the case of a double sided disc, finalize each
side.
The top menu created when finalizing does not
appear on this unit. Play back the disc on a DVD
player. Titles are displayed by recording date on the
top menu. However, when [PLAY MODE] is set to
[BY DATE] to view scenes by recording date, some
scenes recorded on the same date may be
separated. (l 60) These scenes will be displayed
as separate titles on the top menu.
Depending on the condition of the disc, the time it
takes for finalizing will differ. It may take up to
15 minutes.
If this unit becomes hot or is shaken strongly or
impacted while finalizing, the finalization will fail and
the disc may become unplayable on other devices.
If the power supply stops while finalizing, the
finalization will fail and the disc may become
unplayable on other devices even if disc repair is
carried out.
Finalizing a disc
This is for enabling discs to be played on other devices.
DVD-RAM:
It is not necessary to finalize DVD-RAM.
DVD-RW (VR format):
DVD-RW (VR format) after finalization can be recorded and edited in the same way as DVD-
RW (VR format) before finalization.
After finalizing a DVD-RW (VR format) once, you cannot finalize it again. (Even if you record
on or edit a DVD-RW (VR format) after finalizing, it is not necessary to finalize it again.)
DVD-RW (Video format), DVD-R:
After finalizing, the disc becomes play-only and you can no longer record.
When you un-finalize a DVD-RW (Video format), the disc can be used for recording again.
(l 83)
LSQT1184(ENG).book 82 ページ 2007年2月5日 月曜日 午後1時29分