Filter
Top Products
With other products
With a printer (PictBridge)
90
LSQT1184
With a printer (PictBridge)
(SD)
To print pictures by directly connecting this unit to the printer, use a printer compatible with
PictBridge. (Read the operating instructions for the printer.)
≥ Use the AC adaptor to free you from worrying about the battery running down.
¬Insert an SD card with recorded images in the unit, turn on the unit and then
rotate the mode dial to select .
1 Press the MENU button, then select [ SETUP] #
[ USB FUNCTION] # [PictBridge] and press the
joystick.
≥ Press the MENU button to exit the menu screen.
2 Connect this unit and a printer.
[ ] indication appears.
≥ If the [ ] indication does not appear or
continues to flash, disconnect and then reconnect
the USB cable or check the printer, SD card and
settings on this unit.
3 Select a file to be printed, then press the joystick.
The number of pictures set is displayed.
A USB cable (not supplied)
≥ Insert the plugs as far as they will go.
A
LSQT1184(ENG).book 90 ページ ２００７年２月５日 月曜日 午後１時２９分