Filter
Top Products
-8-
WJ-HD500
CONTROL Port
1
13
14
25
20
789101112
DVD Extension Unit #1
Extension Unit #2
Extension Unit #3
Extension Unit #4
Extension Unit #5
Error Out
G
Error Out
G
Error Out
G
Error Out
G
Error Out
G
Extension Unit #6
Error Out
G
Strip
6 mm
To CONTROL port on
the Digital Disk Recorder
WJ-HD500
Terminal board on
the Extension Unit
G
THERMAL ERROR OUT
NC
Error Connection
Connect each of the error outputs to the CONTROL port on the rear panel of the WJ-HD500 as shown below. The WJ-
HD500 will display a thermal error on the monitor screen.
1 2 3 4
MODE
ON
Switch Settings
1. Set MODE switch #2 on the rear of the WJ-HD500 to
OFF when connecting a DVD Extension Unit without
an optional HDD.
Set the MODE switch to ON If the other Extension
Units are installed in the system.
2. Set the SCSI ID and TERMINATION of the Extension
Units as required.