Filter
Top Products
Communicating With a System 51
Model 1195 Getting Started Guide 6 • GUI configuration
Communicating With a System
To communicate with the system, you have to make a connection with the system through a TCP or COM
port.
To select a COM port:
1. Click on the Option menu at the top of the screen and select TCP/COM (Single System).
Figure 12. Select COM port
2. From the drop-down menu, select the COM port that is in use. The message “COM X is selected” will
display.
3. Click OK.
To access the system remotely, select TCP/IP Winsock.
1. Click on the Option menu at the top of the screen and select Communication (Single System).
Figure 13. Select TCP/IP address
2. From the drop-down menu, select the TCP/IP Winsock.
3. Select the IP address of the equipment in the field REMOTE HOST IP ADDRESS.