Filter
Top Products
Specific Commands 38
Model 1195 Getting Started Guide 5 • CLI configuration
View the set community of SNMP
Configure set community of SNMP
Change the IP address of the device
Change the Subnet mask information of the device
Change the Gateway information of the device
Command Response Notes
1195#showsnmpset
{enter}
System SNMP set community:
public
Shows the SET community of SNMP
of the local device
Command Response Notes
1195#setsnmpset [string]
{enter}
System SNMP set community:
[string]
Configure the SET community of
SNMP of the local device, where
[string]=0 to 31
Command Response Notes
1195#setip [ipaddr]
{enter}
System IP address: [ipaddr]
Change the IP address of the local
device, where [ipaddr]=any valid IP
address
Command Response Notes
1195#setmask [subnetaddr]
{enter}
System subnet mask:
[subnetaddr]
Change the subnet mask of the local
device, where [subnetaddr]=any valid
subnet address
Command Response Notes
1195#setgw [gwaddr]
{enter}
System Default Gateway
Address: [gwaddr]
Change the gateway of the local
device, where [gwaddr]=any valid
gateway address