Patton electronic Im1/k Projection Television User Manual


 
1
TABLE OF CONTENTS
SECTION PAGE
1.0 Warranty Information .............................................................2
1.1 Warranty Statement
1.2 Radio and TV Interference
1.3 CE and Telecommunication Approvals
1.4 Service Information
2.0 General Information...............................................................5
2.1 Features
2.2 General Product Description
3.0 Typical Application.................................................................6
3.1 Network Termination Application
3.2 Network Extension Application
4.0 Configuration .........................................................................8
4.1 DIP Switch Configuration
4.2 Jumper Configuration
4.3 Configuring Your Model 1095 mDSL Modem
5.0 Installation............................................................................11
5.1 Installing the IM1/K
5.1.1 Changing QuickConnect Modules
5.2 Installing the IM2RC/K and Front Function Card
5.3 Making Interface Connections
5.3.1 Connect Twisted Pair (120 Ohm) to G.703/G.704
Network
5.3.2 Connect Dual Coaxial Cable (75 Ohm) to
G.703/G.704 Network
6.0 Operation.............................................................................15
Appendix A - Specifications........................................................16
Appendix B - Cable Recommendations .....................................17
Appendix C - Factory Replacement Parts and Accessories ......18
Appendix D - DIP Switches ........................................................19
Appendix E - Jumper Settings....................................................20
2
1.0 WARRANTY INFORMATION
Thank you for your purchase of this Patton Electronics product.
This product has been thoroughly inspected and tested and is warrant-
ed for One Year parts and labor. If any questions or problems arise
during installation or use of this product, please do not hesitate to con-
tact Patton Electronics Technical Support at (301) 975-1007.
1.1 WARRANTY STATEMENT
Patton Electronics warrants all K Module components to be free
from defects, and will—at our option—repair or replace the product
should it fail within one year from the first date of shipment. This war-
ranty is limited to defects in workmanship or materials, and does not
cover customer damage, abuse, or unauthorized modification. This
product contains no serviceable parts; therefore the user shall not
attempt to modify the unit in any way. If this product fails or does not
perform as warranted, your sole recourse shall be repair or replace-
ment as described above. Under no condition shall Patton
Electronics be liable for any damages incurred by the use of this
product. These damages include, but are not limited to, the following:
lost profits, lost savings and incidental or consequential damages aris-
ing from the use of or inability to use this product. Patton Electronics
specifically disclaims all other warranties, expressed or implied, and
the installation or use of this product shall be deemed an acceptance
of these terms by the user. In the event the user detects intermittent or
continuous product malfunction due to nearby high power transmitting
radio frequency equipment, the user is strongly advised to use only
data cables with an external outer shield bonded to a metal or metal-
ized connector.