Filter
Top Products
15
66..00 OOPPEERRAATTIIOONN
Once the Patton K Module is installed and configured, it should
operate transparently. Please refer to the base unit (i.e. Model 1095)
user manual for instructions on how to read the front panel LEDs, per-
form diagnostics, monitor system status, and connect to the DSL line
port.
16
AAPPPPEENNDDIIXX AA
PATTON ELECTRONICS MODEL K MODULE
SPECIFICATIONS
G.703/G.704 Interfaces: Female Dual Coaxial 75 ohm
Female RJ-48C 120 ohm
Line Framing: G.703 (unframed) or G.704 (framed)
Line Coding: Switch Selectable AMI or HDB3
Clock Options: Network Termination and Network
Extension
DTE Rates:
(selected on the base unit)
Nx64 rates (kbps): 64, 128, 192, 256, 320,
384, 448, 512, 576, 640, 704, 768, 832,
896, 960, 1024, 1088, 1216, 1280, 1344,
1408, 1472, 1536, 1600, 1664, 1728, 1792,
1856, 1920, 1984, 2048
Distance: Maximum 1.6 km on 24 AWG Cable
Isolation: 1500 Vrms
Power Supply: Power Supplied via NetLink Standalone Unit
or NetLink front card
Compliance: CE Mark per EMC Directive 89/336/EEC
and Low Voltage Directive 73/23/EEC,
RTTE 99/5/EC Directive
Dimensions: 6.17 x 1.42 x 7.42 cm (2.43 x .56 x 2.92
inches)
Humidity: Up to 95% non-condensing
Temperature: 32 to 140º F (0 to 60º C)