Pelco C1301M TV Mount User Manual


 
6 C1301M (6/05)
Welcome
Thank you for purchasing Pelco’s ExSite
EHXM Series explosionproof system. Your new system features a high resolution camera/optics
package with programmable software.
This manual is designed to be a reference tool for the operation and programming of your system. Inside you will find information about the
features and commands of your EHXM system, as well as a detailed menu tree.
MODELS
EHXM30C22-2 Fixed IOP system with color camera, 60 Hz, 24 VAC
EHXM30C22-2X Fixed IOP system with color camera, 50 Hz, 24 VAC
EHXM31C22-2 Same as EHXM30C22-2, except supplied with window wiper
EHXM31C22-2X Same as EHXM30C22-2X, except supplied with window wiper
EHXM30CBW23-2 Fixed IOP system with day/night camera, 60 Hz, 24 VAC
EHXM30CBW23-2X Fixed IOP system with day/night camera, 50 Hz, 24 VAC
EHXM31CBW23-2 Same as EHXM30CBW23-2, except supplied with window wiper
EHXM31CBW23-2X Same as EHXM30CBW23-2X, except supplied with window wiper
EHXM30C22-7 Fixed IOP system with color camera, 60 Hz, 90-264 VAC
EHXM30C22-7X Fixed IOP system with color camera, 50 Hz, 90-264 VAC
EHXM31C22-7 Same as EHXM30C22-7, except supplied with window wiper
EHXM31C22-7X Same as EHXM30C22-7X, except supplied with window wiper
EHXM30CBW23-7 Fixed IOP system with day/night camera, 60 Hz, 90-264 VAC
EHXM30CBW23-7X Fixed IOP system with day/night camera, 50 Hz, 90-264 VAC
EHXM31CBW23-7 Same as EHXM30CBW23-7, except supplied with window wiper
EHXM31CBW23-7X Same as EHXM30CBW23-7X, except supplied with window wiper
GETTING STARTED
You will need to install your system before using this manual. Refer to the installation manuals for installation instructions. Once installed
apply power to the system. The system will start a configuration sequence. When configuration is done, the following information is
displayed on the monitor:
EXSITE EHXM
Version X.XX
D Address: 1
P Address: 2
Comm 2400, N, 8, 1
CONFIGURE DONE
This information will remain on the monitor until system operation begins. Refer to the following pages to learn how to operate and
program your EHXM Series system.
DANGER: Do not connect the power module to a supply circuit unless all ExSite system components (enclosure, camera
module and power module) are installed.