Filter
Top Products
12 C1629M-F (3/08)
APPLICATION SCENARIOS
This section illustrates two possible application scenarios featuring the DVR5300 Series digital video recorder.
Figure 5 shows a DVR5348 digital video recorder with two ENC5316 USB multichannel video encoders. It includes NET5301T video encoders
(up to 16) in a hybrid digital and analog recording environment. This configuration uses a single Ethernet switch.
NOTE: In this scenario, the NET5301Ts must all be in the same VLAN as the DVR5300.
Figure 5. Security Network with a DVR5348, ENC5316s, and NET5301Ts
IMPORTANT NOTE. PLEASE READ. The network implementations in this document are shown as general representations only and are not
intended to show detailed network topologies. Your actual network will differ, requiring changes or perhaps additional network equipment to
accommodate the systems as illustrated. Please contact your local Pelco representative to discuss your specific requirements.
Figure 6 shows a DVR5324 digital video recorder with three ENC5308 USB multichannel video encoders. This configuration incorporates a matrix
switch for displaying both live and playback video. This configuration also requires a CM9700MDD-EVS to interface playback video to the matrix.
NET5301T
KBD5000
SM5000WS5000 VCD5000
GIGABIT SWITCH
DVR5348
SEB5100
ENC5316 #1
ENC5316 #2
USB
UP TO 16
UP TO 16UP TO 16