Filter
Top Products
30 C1629M-F (3/08)
Operation
Refer to the WS5000 Operation manual for details on how to access and configure the DVR5300.
NOTE: To make sure that all diagnostic messages will appear to a system operator, leave at least one WS5000 Endura workstation or VCD5000
video console display running at all times.
During operation, monitor the unit status and power supply indicator lights to make sure that all drives are operating properly. In case of failure,
system alarms and error messages will also display on WS5000 Endura workstations and VCD5000 video console displays (refer to Appendix F:
Troubleshooting on page 43).
FRONT PANEL CONTROLS AND INDICATORS
Figure 25. Front Panel Layout (Without Bezel)
Figure 26. Front Bezel Indicators
ᕡ
ᕥ
ᕧ
ᕨ
ᕩ
ᕣᕤᕦ
ᕢ
ᕡ
ᕦ
ᕩ
ᕧ
ᕨ