Filter
Top Products
10 C2647M-B (10/09)
REASSEMBLING THE UNIT
1. Replace the chassis cover using the screws you removed from the sides and rear of the unit (refer to Figure 1 on
page 5).
2. Reinstall the unit in a rack enclosure, if necessary, and then reconnect all cables and peripheral equipment you
removed earlier.
3. Reconnect the power cord to the unit.
4. If the blue Pelco badge does not illuminate after the power cord is reconnected, turn on the unit by pressing the
power button on the front panel. The startup takes a long time due to the configuration process required to initialize
the hard disk drive(s). All previously recorded video will be deleted. When the logon screen appears, log on using one
of the following default user names and passwords:
User Name Password
admin admin (or 23646)
manager manager (or 6232437)
operator operator (or 67372867)
guest guest (or 48378)