Filter
Top Products
76 C636M-F (3/09)
CONFIGURING THE DATA TRANSLATOR
1. Go to Start > Programs > DX9000 Viewstation > Server Alert Configuration Utility. The following dialog box appears.
Figure 93. Data Translator Configuration Dialog Box
2. Click Select. The following dialog box appears.
Figure 94. Data Translator Driver Dialog Box
3. Select CM9760DT.dll.
4. Click Open. The following dialog box appears.
Figure 95. Data Translator Driver Settings Dialog Box
5. Enter the offset number in the Server Alert Settings box.
NOTE: The offset number must match the logical and physical numbers of the first alarm in the CM9760 System Manager.