Pelco DX4500 DVR User Manual


 
10 C2673M-D (8/10)
IMPORTANT INFORMATION WORKSHEET
Installing the DX4500/DX4600 DVR on a network will require support from your network administrator. The minimum network requirements for
DX4500/DX4600 Series DVRs include a switched Ethernet LAN with a bandwidth of 100 Mbps. Contact your administrator to assist you in
configuring the network features of the unit.
Before installing or operating the DX4500/DX4600, be sure to obtain, record, and save the following information from your network
administrator:
1. A unique site name for each DVR. (Site names can be up to 25 characters and can include spaces.)
_____________________ _____________________
_____________________ _____________________
2. The TCP/IP port numbers that will be used by all DX4500/DX4600 servers and clients on the network.
9005 (fixed) 13900 (fixed)
Base Port Upgrade Port Emergency Agent Port Information Port Ping Port
(Default = 9001) (Default = 9003) (Default = 9002) (Default = 9005) (Default = 13900)
If your network is not configured for DHCP, be sure to obtain, record, and save the following information from your network administrator:
1. A unique IP address for each DVR. (For example, 10.0.0.101, 10.0.0.102, 10.0.0.103, and so forth.)
____.____.____.____ ____.____.____.____
____.____.____.____ ____.____.____.____
2. The subnet mask for each IP address. (For example, is 255.0.0.0.)
____.____.____.____ ____.____.____.____
____.____.____.____ ____.____.____.____
3. The default gateway IP address for each unit.
____.____.____.____ ____.____.____.____
____.____.____.____ ____.____.____.____
4. The Primary DNS Server IP address for each unit.
____.____.____.____ ____.____.____.____
____.____.____.____ ____.____.____.____
5. The Secondary DNS Server IP address for each unit.
____.____.____.____ ____.____.____.____
____.____.____.____ ____.____.____.____
6. The Multicast Group IP address.
____.____.____.____ ____.____.____.____
____.____.____.____ ____.____.____.____