Filter
Top Products
19EN
English
Adjust
brightness of the TV backlight to
match lighting conditions.
Smooth
out transitions on digital pictures.
You can switch this feature on or
off.
Make
colours more vivid and improve the
details in bright colours.
Adjust the midtone
intensity in the picture. Black and
white are not affected.
Adjust the picture when a
PC is connected to the TV via HDMI
or DVI.
Change the picture
format.
Adjust the viewing
area. (when set to maximum, you may
see noise or the rough edge of an
image).
Adjust the picture
position for all picture formats except
for [Auto zoom] and [Wide screen].
Manually adjust picture settings
Smart picture
Reset
Contrast
Brightness
Colour
Sharpness
Noise reduction
Tint
Picture
Sound
EasyLink
Preferences
Factory settings
Reinstall TV
Picture
1. Press .
2. Select [Setup] > [TV settings] > [Picture],
then press OK.
3. Select one of the following settings, then
press OK.
smart picture settings.
Reset to factory default
settings.
Adjust the intensity
of backlight areas, while the video
contents are kept unchanged.
Adjust the intensity and
details of dark areas.
Adjust colour saturation.
Adjust sharpness in the
image.
Filter and reduce
noise in an image.
Adjust the colour balance in an
image.
Customise tint setting.
(Only available if [Tint] > [Custom] is
selected)
Fine-tune each pixel to
match surrounding pixels. This setting
image.
Enable
superior picture sharpness.
Enhance
contrast. [Medium] setting is
recommended.