Filter
Top Products
Language: using the left or right direction button to
select your desired menu language.
Note: The available languages might differ depending
on the model.
Color System: use the right direction or OK button
to display the selectable options, then press the up or
down direction button to select your desired color system
and press OK to confirm.
(Note: The available color system might differ depending
on the model.Color system for india:PAL. )
Child Lock : Press the right or OK button to enter,then
use the number buttons to input the password
(The default is 0000). Then press the left or right direction
button to select the limit time. To cancel the limit, select
Off. And you can also change the password: select the
PW Modify item and press the right direction or OK button
to enter, then enter a new password twice.
Note: If you forget the password, enter 0432 to
override any existing codes.
Time Setting: Press the up or down direction button to
select the Time Setting item, then press the right
direction or OK button to enter.
Current Time: press the left, right, up, down direction
button to set the current time.
Turn on Repeat: select the times to turn on the TV at a
specific time, press the left or right direction button to
toggle among Off, Once and EveryDay.
(Note: if Off selected, the Turn on Time, Wake Source
and Wake Channel are not adjustable.)
Turn on Time: press the left, right, up, down direction
button to set the turn on time.
Wake Source: press the left or right direction
button to select the wake up signal source.
Wake Channel: press the left or right direction
button to select a wake up channel.
(Note: Only when the wake up source is TV, this
function can be available.)
Turn off Repeat: select the times to turn on the TV at
a specific time, use the left or right direction button to
toggle among Off, Once and EveryDay.
(Note: if Off selected, the Turn off Time is not adjustable.)
Current Time
Turn on Repeat
Turn on Time
Wake Source
Wake Channel
Turn off Repeat
Turn off Time
Sleep Time
--:--
Off
--:--
TV
1
Off
--:--
Off
Selecting a Signal Source or Look
over the Layout of Terminals
Turn off Time: press the left, right, up, down direction
button to set the turn off time.
Sleep Time: sets a period of time after which the TV
set goes into standby mode, use the left or right
direction button to set the period (240 minutes maximum).
To disable this function, select Off.
Restore to default: restores all the settings to defaulted
settings in factory.
Press Menu to return or Exit to close the menu.
Note: For some models, the Motion Enhance option may
be available.
Motion Enhance: This function is used to cancel motion
judder. Select the Motion Enhance option, then use the
left or right direction button set the Motion enhance effect:
Low, Middle, High and Off.
Display the menu by pressing the Menu button. Press the
left or right direction button to select the Source icon and
press the or down direction or OK button to display the
Source menu.
1. Press the up, down, left or right direction button to
select your desired source.
(Note: The available source might differ depending
on the model.)
2. Press the OK button to confirm the selection.
1. Press the up, down, left or right direction button to select
Layout and press OK to display Interface Status.
2. Press the up, down, left or right direction button to look
over.
3.
up
Press Menu to return or Exit to close the menu.
Source
TV
PC
HDMI1
HDMI2
AV 1
AV 2
YPbPr
Layout
Note: You can press the SOURCE button on the remote
control to switch the source. But if the SMART switch
function is on, pressing the source button shall result in
switching between the connected sources only .
Selecting a Signal Source
Look over the Layout of Terminals
Setting
Smart Switch
Startup Setting
Language
Color System
Child Lock
Time Setting
Restore to Default
Off
Default
English
Auto
12 EN