Filter
Top Products
English
17
Select the sound mode
Depending on the sound the TV channel transmits and if your set is equipped
with Nicam, your TV will choose between stereo or digital sound unless you
make a sound choice.
In case of weak stereo or digital sound signals, due to the transmission, select
analogue (digital sound available) or mono.
4 Select Sound Mode in the menu SOUND with the keys V or W.
4 Press the keys C or B to select the preferred sound mode :
. Stereo or Mono if the channel transmits stereo sound
. Digital Sound or Digital Sound available if the TV channel transmits
digital sound.
Switch Loudness on or off
When Loudness On is selected, the low and high frequencies are amplified
so that the natural balance is restored when listening to low volume sound.
The selected setting for Loudness is stored for all TV channels.
Select Speech
When Speech On is selected, the treble settings are revealed and the bass
settings are suppressed.
The selected setting is for Speech is stored for all TV channels.
Select Spatial sound
When Spatial On is selected, it seems as though the loudspeakers are spread
further apart from one another.
You get a spatial sound effect.
The selected setting for Spatial is stored only for the selected TV channel.
Headphone selection
See Connect Peripheral Equipment, p. 34 for the connection of your
headphone if you want to use it.
4 Select Headphone with the keys W or V and press OK.
5 The HEADPHONE menu appears.
4 First select Source with the keys W or V.
5 Source lights up.
4 Press the keys C or B to select the source you want to listen to with your
headphone : Automatic,
TV, EXT1, EXT2, EXT3 or FRONT.
4 Select Automatic if you want to listen to the sound of the picture you are
watching on the screen.
4 Select TV when you want to listen to the sound of a TV channel via your TV
tuner and watch a programme via your video recorder or other peripheral.
E.g. you can watch a film from your video recorder, but listen to the
commentary of a broadcasted football match.
4 In all other cases select the source where you connected your equipment.
The equipment should be switched on, but you don't need to watch it.
4 Select with the keys W or V the adjustments Volume or Balance.
5 The selected adjustment lights up.
4 Press the keys C or B to regulate the selected adjustment.
4 Press MENU.
5 The SOUND menu reappears.
The Volume and Balance adjustment can be stored for all the TV channels with
General PP store in the
FEATURES menu.
HEADPHONE
Volume
Balance
Source