Filter
Top Products
18
Dolby* Pro Logic Install
4 Select Dolby Pro Logic Install with the keys W or V and press OK.
5 The DOLBY PRO LOGIC INSTALL menu appears and Test lights up.
Most programmes will sound good with the volume balance between the
centre, left and right and rear loudspeakers in an equally loud position.
Which loudspeakers are active depends on the selection you have made in the
TV-Configuration menu, p. 10.
4 Select Surround Mode with the keys W or V.
4 Press the keys C or B to select Pro Logic.
4 Select Test again with the keys W or V.
4 Press the keys C or B to switch Test on.
5 A steady noise tone is switched sequentially through the left, centre, right and
rear loudspeakers, for 2 seconds each. This enables you to adjust the volume
of the separate loudspeakers.
The loudspeakers activated light up in the on screen graphic.
4 Select with the keys W or V Centre Volume, Balance or Rear Volume.
5 The selected adjustment lights up.
4 Press the keys C or B to alter the selected adjustment.
4 Select Test again with the keys W or V.
4 Press the keys C or B to switch Test off again.
Surround mode
4 Select Surround Mode with the keys W or V.
5 Surround Mode lights up.
4 Press the keys C or B to select the preferred surround mode : Pro Logic,
Dolby 3 Stereo, Hall or Off.
Pro Logic (with Dolby Surround broadcasting)
5 In addition to the left and right front speakers, the centre and the rear
surround loudspeakers reproduce the Dolby Surround Pro Logic sounds.
This 4-channel sound is always recorded when the movie or programme is
marked with Dolby Surround.
This mode is especially recommended for such programmes or movies.
Dolby 3 Stereo (with Dolby Surround broadcasting)
5 The Dolby 3 Stereo sound signal is now distributed over the front left, the
front right and the centre loudspeakers.
5 The rear loudspeakers do not produce any signal.
Hall (with Dolby Surround broadcasting)
5 The centre sound signal is distributed over the rear loudspeakers which
creates a hall effect from the rear.
5 The centre loudspeaker does not produce any signal.
This mode is recommended when you wish to add surround sound to a
broadcast which is not encoded Dolby Surround.
Off
5 This mode reproduces only the left and right front sound signals.
You only hear a stereo sound if the broadcast which you are watching or
listening to is transmitted in stereo or digital sound.
4 Press MENU twice.
5 The MAIN MENU reappears.
"Dolby" "Pro Logic" and the double-D symbol are trademarks of Dolby
Laboratories Licensing Corporation.
Manufactured under license from Dolby Laboratories Licensing Corporation.
DOLBY
PRO LOGIC
INSTALL
Test
Centre Volume
Balance
Rear Volume
Surround Mode
Centre
Right
Rear Rear
Left
Dolby 3 Stereo
Hall
Off
Pro Logic
SOUND
Volume
Balance
Graphic Equalizer
Sound Style
Sound Mode
Loudness
Speech
Spatial
Headphone
Dolby Pro Logic Install
*