Filter
Top Products
36
3. Enabling the Card Slot
For the System SmartCard or System Box to
function, the Card Slot must be enabled.
Press the > button to select
ENABLE CARD SLOT.
COMMUNICATION
COMMUNICATION SP - 12C
STORE >
ENABLE CARD SLOT YES
DCM TYPE GENERIC
Press the > button to select YES
(if applicable).
Press the > button to select STORE
and press the > button to store
selections.
4. Selecting the Low Power Standby
For the System SmartCard or System Box to
function, NO must be selected.
In the CONFIGURATION menu,
select FEATURES.
Press the > button to enter the
FEATURES menu.
Press > button and select LOW
POWER STANDBY.
•
•
•
•
•
•
FEATURES
SMART POWER LOW
SMART SOUND KEY SMART SOUND
DEFAULT HDMI 1 AUDIO EXT3 AUDIO
DEFAULT HDMI 2 AUDIO HDMI
LOW POWER STANDBY NO
Press the > button to select NO.
5. Checking the installation of System
SmartCard or System Box
To check whether the installation is
done correctly, press the RECALL
button on the green remote control to
display menu.
01 26HF7875 / 10
02 SV1A0707100003
03 IC7E1 - 0 . 18
04 LC71HEL1 - 0 . 22
05 OPT (2C) 12 28 D3 6F
06 OPT - MODEL 26HF7875 / 10
07 CLOCK OK
08 COMMUNICATION SP - I2C OFFLINE
09 TV 1 NOT TUNED
See item 08 of the menu. If SP - I2C
shows “OFFLINE”, check whether the
System SmartCard is correctly inserted
into the card slot of the TV.
For System Box, check whether the
RJ12 cable and connection between
terminal and TV is properly connected.
For more information, see “Diagnosing
Basic Problems” on pages 38-39.
•
•
•
•
•
Installing a System SmartCard or System Box