Filter
Top Products
39
Appendix A – Multi Remote Controls Support
Programming the Multi Remote
Controls function
Multi RC function supports up to four
TV sets operating in one room without
any interference from each other remote
controls. Each Guest Remote Control must
be programmed individually to one of the
four colour (Blue, Yellow, Green and Red)
buttons on the remote control.
Press the
button on the GREEN
remote control to activate the TV
SETUP Menu.
Press the > button to select
COMMUNICATION.
SETUP
LANGUAGE ENGLISH
COMMUNICATION >
NO. OF PROGRAMS >
PROGRAM INSTALL >
CONFIGURATION >
CLOCK SETUP >
Press the > button to enter the
COMMUNICATION menu.
COMMUNICATION
COMMUNICATION MULTI RC
STORE >
REMOTE CONTROL BLUE
Press the > button repeatedly until
MULTI RC is selected.
Press the > button to select
REMOTE CONTROL.
1.
2.
3.
4.
5.
COMMUNICATION
COMMUNICATION MULTI RC
STORE >
REMOTE CONTROL YELLOW
Press the > button repeatedly to toggle
through the four colours and select your
preferred colour.
Press the < button to select STORE
and press the > button to store your
selection. Press the
button to exit
menu.
Using the Guest Remote Control, press
the MENU and the YELLOW buttons
simultaneously to set the remote control
to the corresponding colour that you
have selected in the REMOTE
CONTROL option. If BLUE colour is
selected at the REMOTE CONTROL
option, correspondingly, you must select
BLUE colour button on the Guest
Remote Control.
You can now use the Guest Remote
Control to operate the TV set.
To check whether you have
programmed the MULTI RC function
correctly, press the OK button on the
Guest Remote Control for fi ve seconds.
Information of the Remote Battery,
Remote Colour and the TV Colour will
be shown on the screen. If the Remote
Colour and the TV Colour do not
match, you need to re-programme and
ensure they match to enable the Guest
Remote Control to operate the TV.
6.
7.
8.
9.