Filter
Top Products
EN 37
English
7. The *.upg Help file is extracted.
8. Disconnect the USB flash drive from the
PC.
Do not switch off the TV or remove
the USB flash drive during the update.
If a power failure occurs during the
update, do not remove the USB flash
drive from the TV. The TV will
continue the update as soon as power
is restored.
If an error occurs during the update,
retry the procedure. If the error
reoccurs, contact Philips Consumer
Care.
1. Switch on the TV.
2. Connect the USB flash drive containing
the *.upg Help file to the USB connector on
the TV. Disconnect all other USB devices
from the TV.
3. Press .
4. Select [Setup] > [Software settings] >
[Local updates].
The updates screen appears.
5. Select the '*.upg' Help file and press OK.
A message will display the update status.
Follow the on-screen instructions to
complete the update and restart your TV.
Reinstall the TV
Reinstalling your TV resets all picture and
sound settings, and reinstalls all TV channels.
1. Press .
2. Select [Setup] > [TV settings] >
[Reinstall TV], then press OK.
3. Follow the on-screen instructions.
Downloaded From TV-Manual.com Manuals