Philips 32PFL5605H TV Antenna User Manual


 
EN 53
English
(Previous) / (Next): Searches
backwards and forwards on the
connected device.
Numeric buttons: When EasyLink is
enabled, selects a title, chapter or track.
(Options): Displays the menu of the
connected device. When is pressed,
the TV menu is displayed.
(Standby): Press to enable one-touch
standby. This switches the TV and the
connected device to standby.
Other EasyLink buttons are available via
On-Screen Remote Control (OSRC).
To access the OSRC
1. While watching a connected device, press
.
2. Select [Show remote control], then press
OK.
3. Use the Navigation buttons and OK to
select and use an on-screen button.
4. Press to exit.
Configure TV speakers
NonPublish
You usually connect the TV to a HDMI-CEC
compliant device such as a HTS using both a
HDMI cable for video and a digital audio
cable for audio. You can output TV audio
through the HDMI cable solely, provided
both the TV and device are HDMI ARC
compliant (see Connect the TV > Use
Philips EasyLink > Use HDMI ARC (Page
53)).
Configure TV speakers
1. Press .
2. Select [Setup] > [TV settings] >
[EasyLink] > [TV speakers].
3. Select one of the following options, then
press OK:
[Off]: Turn off TV speakers.
[On]: Turn on TV speakers.
[EasyLink]: TV audio continues to be
streamed through the TV speakers.
Switch the TV audio to the connected
HDMI-CEC audio device through the
experience menu.
[EasyLink autostart]: Turn off TV
speakers automatically and streams TV
audio to the connected HDMI-CEC
audio device.
Switch TV audio in experience menu
If [EasyLink] or [EasyLink autostart] are
selected, access the experience menu to
switch the TV audio.
1. While watching TV, press .
2. Select [Speakers], then press OK.
3. Select one of the following, then press
OK:
[TV]: On by default. Streams TV audio
through TV speakers until the
connected HDMI-CEC audio device
switches to system audio control.
Thereafter, TV audio is streamed
through the connected device.
[Amplifier]: Streams audio through the
connected HDMI-CEC device. If system
audio mode is not enabled on the
device, audio will continue to stream
from TV speakers if [EasyLink] was
selected. If [EasyLink autostart] was
enabled, the TV prompts the
connected device to switch to system
audio mode.
Downloaded From TV-Manual.com Manuals