Filter
Top Products
If you entered a known code, all universal mode
keys will blink to confirm the selection. If you
entered an unknown code, all universal mode
keys will light up for 2 seconds. Repeat Step 2
with a different code.
Ò Point the remote control at the device, and
press B to test if the code is known for your
device.
If successful try whether you can operate all
functions. If not successful, or if you cannot
operate all functions, repeat Step 1 and 2 with
one of the other setup codes for your brand.
Method 3:Automatic search of all codes
If you are not successful to find the known brand
or code, try an automatic search of all codes.The
automatic search can take several minutes.
If after the automatic search no code is successful, it
is not possible to operate your particular device
with the remote control. In such case, use the
device's own remote control.
‡ Turn on the device you want the TV remote
control to set up for.
®.Point the remote control to the device during
the automatic search.
Ò To select the universal mode you need, press
the DVD, STB or HTS key and the OK key at
the same time for 4 seconds.
The selected universal mode lights up
constantly.
† Press OK to start the automatic search.
Every two seconds, when a new code is sent,
the B key will blink.
Keep pointing the remote control to the device.
º When the device switches off, press OK to
stop the search.
◊Press B to switch on your device.
‹Press the remote control keys to try if you can
operate all functions. If you cannot operate all
functions, press OK again to continue the
automatic search for a correct code.
≈If you can operate all functions, press the
currently selected universal mode key to
confirm and to quit the automatic search.
rNote:
To pause the automatic search, press OK. Press o
or œ to search for the codes one by one backward
or forward to locate the known code for your
device or press OK again to continue the
automatic search.
5.1.4 Keep the remote control in the
chosen universal mode permanently
If you press the DVD, STB or HTS key the remote
control can operate other devices. When no key is
pressed for 30 seconds the remote control
switches back to normal TV.
You can set the remote control to hold a universal
mode as long as no other universal mode is
pressed.This disables the 30 seconds switch back to
normal TV.
‡ Press the TV key.
® Press OK and ¬ at the same time for 4
seconds.The B key lights up for 2 seconds.
From now on the remote control will not switch
back to normal TV mode.
To return to the 30 seconds switch back to
normal TV mode, follow the same steps 1 and 2.
5.1.5 Device functions overview
When the remote control is set for a particular
device all keys have the same function except the
keys mentioned here.
• DVD player
Menu key = DVD Disc menu
P+/- = DVD Next/Previous track
• DVD Recorder
Ò key = DVD-R previous track
† key = DVD-R next track
• DVD recorder with Hard Disc Drive
Menu key = DVD-R HDD browser
Ò key = DVD-R HDD previous track
† key = DVD-R HDD next track
• Blu-ray Disc player
a key = BD Content menu
Menu key = BD Disc menu
14 Use more of your TV
2705.3 EN 20-05-2008 10:03 Pagina 14