Filter
Top Products
7
Switch channels
Press BACK A/CH on the remote
control to return to the previously
viewed channel.
Press CH +/- on the remote control or
P/CH +/- on the side of the TV.
Press OK to use the channel matrix.
Enter a channel number using the
Numeric buttons .
Note
When you use a favorite list, you can only
select those channels in the list (see ‘Select a
favorite list’ on page 12 ) .
•
•
•
•
•
4 Use your TV
This section helps you perform basic TV
operations.
Switch your TV on/off or to
standby
To switch on
If the standby indicator is off, press
POWER at the side of the TV.
If the standby indicator is red, press
( Standby-On ) on the remote control.
To switch to standby
Press
( Standby-On ) on the remote
control.
The standby indicator switches to red.
To switch off
Press
POWER at the side of the TV.
The standby indicator switches off.
Tip
Though your TV consumes very little power
when in standby, energy continues to be
consumed. When not in use for an extended
period of time, disconnect the TV power cable
from the power outlet.
•
Note
If you cannot locate your remote control and
want to switch on the TV from standby, press
P/CH +/- at the side of the TV.
•
•
•
•
»
•
»
English
EN