Filter
Top Products
SOUND MENU CONTROLS (CONTINUED)
L
R
S-VIDEO-1 S-VIDEO-2
ANT A / CABLE
75⍀ UHF/VHF
R
L
PIP
ANT B / CABLE
75V UHF/VHF
REAR SURROUND
EXT. SPEAKERS
AUDIO
OUT
VIDEO
OUT
AUDIO INPUT
AUX 1 AUX 2
AUX 1 AUX 2
VIDEO INPUT
AUDIO OUT
VAR PIP
RR
LL
– 8⍀ +
STOP ■
REW
ᮤᮤ
FF
ᮣᮣ
PLAY
ᮣ
REC ●
STATUS
VOL
CH
1
2
3
4
5
6
7
8
9
0
ON/OFF
TV/VCR
VCR
CBL
TV
SWAP
FREEZE
POS
SIZE
ENTER
M
E
N
U
M
CLEAR
SURF
MUTE
PAUSE II
SLEEP
SMART
POWER
M
ODE
LIGHT
2 TUNER PIP
B
ᮤ
ᮤ
A
SOUND MENU
SECOND AUDIO PROGRAM
EXIT
2 OF 3
TV SPEAKERS
MORE...
DISPLAY VOLUME
TV SPEAKERS
HELP
EXIT
NORMAL
TV SPEAKERS OFF
1
AUX/TV INPUT
PHONO INPUT
L
R
2
4
3
5
4
3
STEREO
TV SPEAKERS
W
ould you like to hear TV
programs through your audio
hi-fi system? The TV's Variable
Audio Output jacks and TV
Speaker On/Off control work
together to offer you this TV sound
option.
Connect the R(ight) and L(eft)
VARIABLE AUDIO OUT jacks
on the TV to the R and L Audio
Input jacks on your amplifier or
sound system.
Set the audio system's volume to
normal listening level.
Turn the TV and audio system
ON. You can now adjust the sound
level coming from the audio
system with the Volume ▲▼
buttons on the TV or remote.
To hear the TV sound from only
the audio system speakers, select
TV SPEAKERS control.
With SOUND MENU (2 of 3) on
screen, move the RED highlight
with the MENU (M) buttons.
Then press the MENU button.
Press the MENU ▲▼ and
MENU (M) buttons to highlight
and turn OFF (ߜ) the TV
SPEAKERS control.
You should now only hear TV
sound coming from the audio
system speakers.
Press the STATUS button to
clear the screen.
STOP
1
2
3
4
5
BACK OF TV
AUDIO SYSTEM
AUDIO IN
(RED/WHITE)
BEGIN
VARIABLE
AUDIO
OUTPUT JACKS
SMART HELP
Remember, the audio
system may have to be in
AUX(iliary) mode to play sound
from the TV (Outputs).
Note: When the TV SPEAKER
control is set to "NORMAL" (for
TV speaker operation) make sure
the VARIABLE AUDIO OUTPUT
control (see next page) is also set
to "STEREO" in order for the TV's
AUDIO OUTPUT jacks to work
properly.
26
NOTE: The TV’s PIP AUDIO
OUTPUT jacks can also be used for
additional stereo playback options
such as wireless transmitter headphone
hook-up, or as an external amplifier
connection source. However, with
normal PIP feature operations (when
the ANT A and ANT B Input sources
are connected for use), the PIP
AUDIO OUTPUTs will switch from
stereo to monaural (mono) sound.
Stereo sound will only be available
with the TV’s Main screen (or ANT A
supplied signal) at that time.