Filter
Top Products
18
User Manual BDS4241R
5. BASIC FUNCTIONS
5.1 POWERING ON / OFF
Make sure the PDP is plugged into the wall outlet with the supplied
power cord.
If the power is plugged in, the STATUS LED on the control panel will
illuminate in red color.
Using Front Panel or Remote Control
1 Press the MENU button on the front panel or remote control.
=> The PDP will now turn on after a brief pause.The STATUS LED
will now turn green to indicate power on status.
2 Turn off the power by pressing the POWER button on the front
panel or the remote control again.
5.2 SELECTING SIGNAL SOURCE
Using Front Panel or Remote Control
1 Press the MENU button on the front panel or remote control.
2 Pressing the CH+ or CH- button will cycle the PDP through all
available input signal sources in the following order:
TV - SCART 1 - SCART 2 - VIDEO - S-VIDEO -
COMPONENT - RGB - DVI
3 Press the VOL+ or VOL- button to select the source.
Main Input
Move [- CH +] Select [- VOL +] Exit [MENU]
TV
SCART 1
SCART 2
VIDEO
S-VIDEO
COMPONENT
RGB
DVI
Downloaded From TV-Manual.com Manuals