Filter
Top Products
35
User Manual BDS4241R
Swapping the main picture and the sub-picture
Press the SWAP button.
The main picture and the sub picture are interchanged.
It is available in PIP and PBP mode only.
Swapping the audio of the main or sub-picture
Press the A.SWAP (Audio SWAP) button repeatedly.
You can hear the audio of the main or sub-picture alternately.
It is available in PIP and PBP mode only.
Selecting the main picture or the sub-picture
Press the S.SELECT button repeatedly.
You can select the main or sub-picture alternately and adjust the status
of selected picture.
It is available in PIP and PBP mode only.
PIP Settings
“” Max. : 480p, 576p, 1024x768/60Hz
In the PIP mode, the sub input source is differently defined
for the default value (scart1 or scart2) depending on your PDP model.
6.14 REMOTE MANAGEMENT
This display can be managed remotely through the RS232 9-pin port,
by using a Serial Interface Communication Protocol (SICP).
The specifications of the SICP protocol can be found in a separate
document, called "SICP User Manual".
TV
SCART 1
SCART 2
VIDEO
S-VIDEO
COMPONENT
RGB
DVI
Main Input
Sub Input
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
XXXX
SCART 1 SCART 2 VIDEO S-VIDEO
TV
SCART 1
SCART 2
VIDEO
S-VIDEO
COMPONENT
RGB
DVI
Main Input
Sub Input
X
X
X
X
SCART 1 SCART 2 VIDEO S-VIDEO
Downloaded From TV-Manual.com Manuals