Filter
Top Products
75
EN
9.5 Display
This screen is used to set the TV output signal
parameters.
1 Select values for the following:
•
TV Screen Format: select 4: 3 or 16: 9
depending on your TV screen format
•
Display Format: Letter Box, Centre cut-out, or
Auto
• TV SCART Output: default setting is RGB. Do
not modify it unless your TV does not support
RGB.
• AV Control: for proper operation, it is
recommended to keep this setting to ON.
2 Press EXIT to exit the screen.
9.6 Dolby Digital
This screen is used to enable/disable automatic selection
of Dolby Digital sound.
When Dolby Digital is disabled, you can still get stereo
sound in digital format (PCM).
9.7 Wake-up channel
This scr
een is used to set the channel to be tuned at
the receiver wake-up. Default setting is channel 200.
DCR 2021_Premiere_indice 1b 7/03/06 11:45 Page 75