Filter
Top Products
45
RQT9428
Playing
back
To enjoy High Bit rate Audio and Video
Enjoying High Bit rate Audio with 7.1ch speaker
This unit can decode high bit rate audio (Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD Master Audio) adopted
in BD-Video.
To enjoy 7.1ch surround sound, the following conditions are necessary (Part shown in the shaded area of table given below).
Connect an amplifi er/receiver with 7.1ch speaker supporting HDMI (High Bit rate Audio) using a High Speed HDMI cable. (➡ 100)
Set “BD-Video Secondary Audio” to “Off” in the Setup menu. (➡ 91)
Set “Dolby D/Dolby D +/Dolby TrueHD” or “DTS/DTS-HD” to “Bitstream” or “PCM” in the Setup menu. (➡ 91)
About audio from audio output terminal
Connect an amplifi er/receiver and confi rm the desired audio type and necessary settings (“BD-Video Secondary Audio”, “Dolby D/Dolby D +/
Dolby TrueHD” or “DTS/DTS-HD”).
The number of channels listed is the maximum possible number of output channels.
Also, depending on the specifi cations or the settings of the amplifi er/receiver, the results of the output may vary.
Terminal HDMI AV OUT DIGITAL AUDIO OUT
“Dolby D/Dolby D +/
Dolby TrueHD”/
“DTS/DTS-HD”
“Bitstream”
1
“PCM”
3
“Bitstream” “PCM”
“BD-Video
Secondary Audio”
“On”
2
“Off” “On” “Off” “On”/“Off” “On”/“Off”
Dolby Digital/
Dolby Digital EX
5
Dolby Digital/
Dolby Digital
EX
6
Dolby Digital/
Dolby Digital EX
5.1ch PCM
Dolby Digital/
Dolby Digital
EX
6
Down-mixed 2ch
PCM
Dolby Digital Plus
Dolby Digital
Dolby Digital Plus
5.1ch PCM
2
7.1ch PCM Dolby Digital
Dolby TrueHD Dolby TrueHD
DTS Digital
Surround/
DTS-ES
5
DTS Digital
Surround/DTS-
ES
6
DTS Digital
Surround/
DTS-ES
DVD-V
5.1ch PCM DTS Digital
Surround/
DTS-ES
6
BD-V
7.1ch PCM
4
DTS-HD High
Resolution Audio
DTS Digital
Surround
DTS-HD High
Resolution Audio
7.1ch PCM
4
DTS Digital
Surround
DTS-HD Master
Audio
DTS-HD Master
Audio
7.1ch LPCM
Down-mixed
5.1ch PCM
7.1ch PCM
Down-mixed
5.1ch PCM
2
7.1ch PCM
Down-mixed 2ch
PCM
1
When the connected equipment is not supported with these audio format, the audio is output as Dolby Digital bitstream, DTS Digital Surround
bitstream or down-mixed 2ch PCM (e.g., TV).
2
BD-V
: When playing BD-Video without secondary audio or clicking sound, the audio is output as the same format as if “BD-Video Secondary
Audio” was set to “Off” in the Setup menu. (➡ 91)
3
When the connected equipment is not supported with multi channel surround, the audio is output as down-mixed 2ch PCM.
4
BD-V
: When the connected equipment is supported with 7.1 channel surround, the audio output is amplifi ed from 5.1ch or 6.1ch to 7.1ch
depending on the DTS, Inc. specifi cations.
5
With PCM output, Dolby Digital EX becomes PCM audio decoded as Dolby Digital, DTS-ES recorded to DVD-Video becomes PCM audio
decoded as DTS Digital Surround, and DTS-ES recorded to BD-Video becomes PCM audio decoded as DTS-ES.
6
BD-V
: When “BD-Video Secondary Audio” is set to “On” in the Setup menu, Dolby Digital EX is output as Dolby Digital and DTS-ES is output
as DTS Digital Surround, however if playing BD-Video without secondary audio or clicking sound, the audio is output as the original format.
Note
When setting “BD-Video Secondary Audio” to “Off” in the Setup menu, the clicking sound on the menu and audio with secondary video in
picture-in-picture mode (➡ 44) cannot be output.
Regarding 24p output
Many BD-Video movie contents are recorded in 24 frames/second in accordance with the fi lm materials. However, they will normally be output in
60 frames/second in accordance with the display format.
These can be output in 24p as the original. Therefore, high-quality video can be enjoyed, such as the improved clarity, enhanced perspective,
etc.
Preparation
Connect to a TV supporting 1080/24p input via an HDMI cable.
Set “BD-Video 24p Output” to “On” in the Setup menu. (➡ 92)
DMR-BW850GL_en.indb 45DMR-BW850GL_en.indb 45 2009/04/08 午前 10:01:002009/04/08 午前 10:01:00