Philips DSR 300/00 Satellite TV System User Manual


 
6.3.2 Using the channel list
- For a complete overview of the available channels while
watching satellite TV or listening to satellite radio, press
<OK> on the remote control.A channel list is displayed
on the left-hand side of the screen.
Note: if you press <BACK>, the channel list disappears.
- To select a channel, scroll up or down this channel list, and
then press <OK> to watch it.
6.4 Channel lists
While watching digital TV or listening to digital radio, you
can enable all available channel lists by pressing <FAV> on
the remote control. Successively press <FAV> to toggle
between the favourite lists you created and the full channel
list.The current channel list is indicated on the left-hand side
of the banner.
When one of the favourite lists is activated, you zap only
through the channels this list contains.
To create and edit your favourite lists, see paragraph 8.3.
6.5 TV or Radio Mode selection
While watching satellite TV or listening to satellite radio,
press TV/RADIO on the remote control to toggle between
TV and Radio modes.
6.6 Volume & Audio Control
6.6.1 Volume control and Mute
- To increase or decrease the volume, use < > on the
remote control.
Note:
the volume le
vel can also be controlled from your TV.
- To mute the sound, press < > on the remote control
- To resume normal sound, press this key once again.
Note: change of volume is signalled on-screen using a bargraph,
while audio mute is signalled with an icon in the top right corner
of the screen.
English
GENERAL
VIEWING
FUNCTION
19
Doc_DSR300.qxd 29/11/04 13:19 Page 19