Filter
Top Products
which the selected value is valid are displayed at the
bottom of the screen.
- Press <OK> to store the selected value and go back to
the previous screen or <BACK> to cancel and the screen.
In case the information supplied by the satellite is not
correct, the Time Setting screen is used to set the actual
date and time using the arrow or numerical keys of the
remote control as appropriate.
7.6.2 System Setting
Note: your TV settings will be overwritten by the receiver settings.
This feature is used to set the system settings.
- Select the System Setting item from the Setup menu to
access the System Setting screen.
- Select appropriate values for the following:
• Menu Language: Dutch, English, French, German
(default value), Italian, Polish and Turkish
• Audio Language: Dutch, English, French, German
(default value), Italian, Polish and Turkish
• Screen Format: 4:3 or
16:9 (wide screen)
• TV Video Output: RGB (default value) or CVBS
• VCR Video Output: S-VHS or CVBS
• Start On Channel, which is tuned when you activate
your receiver from Standby
Note: if not enabled (none), the default value is the last
channel you watched before you put your receiver on
Standby.
• Subtitle Language: Dutch, English, French, German
(default value), Italian, Polish and Turkish
• Audio Output: Stereo (default value), Left, Right, Mono.
Note: access to this menu can be protected by Pin Code.
7.6.3 Remote Control setting
If you have a Philips TV set equipped with a universal remote
control which in 'STB' mode is able to perform certain
actions like channel up/down, your receiver offers you the
possibility to do so.
However, if you have other items of equipment in your home
and the Philips remote control of your receiver interferes
with them, it is recommended to change the setting of both
your receiver and remote control.
English
MENU 29
Doc_DSR300.qxd 29/11/04 13:19 Page 29