Filter
Top Products
English
22
Option 2: Using the VIDEO In
jack
Use the VIDEO connection if your
camcorder has only a single video output
(Composite Video, CVBS).
A
Connect the VIDEO(CAM1) jack on
the front panel of the recorder to the
corresponding S-VHS or Video output
jack on the camcorder.
B
Use an audio cable (red/white ends) to
connect the AUDIO L/R jacks on the
front panel of the recorder to the audio
output jacks on the camcorder.
Before you start operating, press REC
SOURCE on the remote control
repeatedly to select ‘CAM1’ as the input
channel, depending on your connections.
See the chapter “Recording” for details.
Step 2: Optional Connections (continued)
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
R
L
VIDEO (CVBS)
EXT 2
S-VIDEO (Y/C)
INPUT
EXT 1
AUDIO
TV-OUT
ANTENNA-IN
L
R
B
A
Rear panel of
recorder
Option 3: Using the S-VIDEO In
jack
Use the S-VIDEO connection if you have
a Hi8 or S-VHS(C) camcorder. It
provides good picture quality.
A
Use an S-Video cable (not supplied.)
Connect the S-VIDEO (Y/C) EXT2
jack on the rear panel of the recorder to
the corresponding S-VHS output jack on
the camcorder.
B
Use an audio cable (red/white plugs) to
connect the AUDIO L/R jacks on the
recorder to the audio output jacks on
the camcorder.
Before you start operating, press REC
SOURCE on the remote control
repeatedly to select ‘EXT2’ as the input
channel, depending on your connections.
For details, see “Recording – RECORD
settings”.